Calibrating Printers

Articles regarding the use of the club's ColorMunki Photo
Post Reply
Pamela Moncur

Calibrating Printers

Post by Pamela Moncur » Wed Mar 13, 2013 4:38 pm

I took up photography as I don't have steady eye-hand coordination & can't draw a stick to look like a stick. Using the colormunki for the first time I found it frustrating going up & down the columns to no avail. I discovered that putting a transparent ruler over the columns helped it sort itself out much more easily. Hope this helps.

Pamela

Mike Hynes
Site Admin
Posts: 31
Joined: Mon Mar 24, 2008 8:10 pm

Re: Calibrating printers

Post by Mike Hynes » Sun Mar 17, 2013 3:11 pm

Pamela Moncur wrote:I took up photography as I don't have steady eye-hand coordination & can't draw a stick to look like a stick. Using the colormunki for the first time I found it frustrating going up & down the columns to no avail. I discovered that putting a transparent ruler over the columns helped it sort itself out much more easily. Hope this helps.
Pamela
. . . And make sure to wait until the CMP is actually on the blank end of the paper before turning it's light on (ie pressing the switch on the side of it), and also making sure that the CMP is on the blank paper at the other end of the run when releasing the switch.
Mike

Post Reply