Page 1 of 1

Calibrating Printers

Posted: Wed Mar 13, 2013 4:38 pm
by Pamela Moncur
I took up photography as I don't have steady eye-hand coordination & can't draw a stick to look like a stick. Using the colormunki for the first time I found it frustrating going up & down the columns to no avail. I discovered that putting a transparent ruler over the columns helped it sort itself out much more easily. Hope this helps.

Pamela

Re: Calibrating printers

Posted: Sun Mar 17, 2013 3:11 pm
by Mike Hynes
Pamela Moncur wrote:I took up photography as I don't have steady eye-hand coordination & can't draw a stick to look like a stick. Using the colormunki for the first time I found it frustrating going up & down the columns to no avail. I discovered that putting a transparent ruler over the columns helped it sort itself out much more easily. Hope this helps.
Pamela
. . . And make sure to wait until the CMP is actually on the blank end of the paper before turning it's light on (ie pressing the switch on the side of it), and also making sure that the CMP is on the blank paper at the other end of the run when releasing the switch.
Mike